It has broad prospects for development of mold industry, but in the process of manufacturing, mold factory noise is a big problem, many residents reflect the noise, so how to reduce the noise of the mold factory?
1, pay attention to mold maintenance, cleaning, keep a sharp edge.
2, die cutting edge shape, quantity, material and punching tangent length, blade mold parts export and contact surface not too big, punch do step and oblique edge blanking mould in different position of the cut in different depth. The whole process to achieve cut-off of the real, rather than synchronization to squeeze off.
3 die blade, mouth must be vertical to the installation surface and punch and die cutting edge clearance should be reasonable, difficult discharge may increase the die gap, increase discharged material force, the soft surface relief plate method.
4, the working template with the accuracy of the processing of some exhaust.
5, do small baffle fight, the stripper, to insert the template type, reduce the attack area.
6, stripper elastic top source change for T type push rod, spring is arranged in the upper die seat, high set and the top rod is equipped with, mold state assurance stripper is still a certain amount of free activities.
7, maintain good lubrication, die without interference, smooth.
- close this page
- Comments
- recommendation：
